DOEPFER LMK2+ Guide de l'utilisateur télécharger pdf (Page 15)

LMK4+ User's Guide Page 15

2.3.5 Controller Assign/Activate (5)

This menu is selected by pressing the fifth MENU-button from the left. The menu has 2 functions.

The first is the assignment of controllers to the standard MIDI-functions ("Assign"- function). The second is the

activation of the controllers in the various keyboard zones ("Activate"-function).

When entering this menu one reaches the "Activate"-portion first. The following message appears on the display:

ZONE : 00Y

CONTR.X ON/OFF

Next to the word "ZONE" appears the number 00Y of the keyboard zone last selected in the SPLIT-menu. The

activation of the controllers in the CONTROLLER ASSIGN/ACTIVATE-menu always refers to the zone previously

selected in the SPLIT-menu.

The BANK-buttons are for the various controllers (i.e. wheels, sliders, data entry, external footcontrollers and

footswitches, aftertouch). The following controllers are allocated to the 8 BANK-buttons (starting on the left and

showing the abbreviations seen on the display):

Spring-loaded modulation wheel WHEEL1

Non-spring-loaded modulation wheel WHEEL2

External variable foot controller 1 E.CTR1

External variable foot controller 2 E.CTR2

Slider 2 CTR2

Aftertouch sensor ATOUCH

Slider 1 CTR1

Rotary potentiometer CTR3

The NUMBER-buttons are for the switch-controllers (double footswitch). The following controllers are allocated to

these buttons (starting at the left and showing the abbreviations seen on the display):

Footswitch 1 EX.SW1

Footswitch 2 EX.SW2

The other six NUMBER-buttons are not used since the LMK4+ only uses the two footswitches above.

If one of the 10 buttons used for controller assignment purposes is pressed the display will show the

abbreviation of the controller on the left of the lower line, followed by an arrow-symbol (->). The function currently

assigned to that controller is also indicated (see below for abbreviations). On the right side of the lower display line

will be the word "ON" or "OFF", depending on whether or not the controller in question is activated in the keyboard

zone currently being worked in. Repeated pressing of the switch representing that particular controller allows for

switching back and forth between "ON" and "OFF". If a footswitch has been assigned to the LINK-function (LNK)

one can activate this function only in zone 1 since it is a global parameter which can not be set differently for the

various keyboard zones. If an attempt is made to activate the LINK-function in zones 2-8, then the message "LINK

IMPOSSIBLE" will appear in the display.

The assignment of a controller to a MIDI-function can NOT be changed in this portion of the menu since it

represents a global parameter for the entire preset, not just for a particular keyboard zone! Pressing the fifth

MENU-button again calls up the "Assign"- portion of the menu. It is here that controllers are assigned to the

various MIDI-functions. The following message appears on the display:

ASSIGN CONTROLLERS

TO MIDI EVENT

These settings, as mentioned above, have global meaning for the entire preset, not just a single keyboard zone.

The assignment of controllers to MIDI-functions is identical for all 8 keyboard zones. As discussed earlier, it is

possible to choose whether or not a controller will be active in a given keyboard zones. This is done in the

"Activate"-portion of this menu.

The 8 BANK-buttons and the 2 leftmost NUMBER-buttons once again represent the same controllers as in the

"Activate"-portion of this menu.

After one of the 10 controllers has been selected, the lower line of the display will once again show that controller's

abbreviation followed by an arrow-symbol (->) and the current assignment to a MIDI-function. The assignment of

the controller can now be changed by means of the data-entry dial.

REMEMBER: The new assignment will be a global parameter for the entire preset!

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

DOEPFER LMK2+ Guide de l'utilisateur Page 15

Commentaires sur ces manuels

Produits connexes et manuels pour Pianos numériques DOEPFER LMK2+