E
Warning:
Inside the A-100 cases are dangerous voltages. It is essential to take careful
note of the following safety instructions:
• Before using any part of the instrument, read these instructions and notes
carefully.
•
The instrument may only be used for the purpose described in this operating
manual. Due to safety reasons, the instrument must never be used for other
purposes not described in this manual. If you are not sure about the intended
purpose of the instrument please contact an expert.
•
The instrument may only be operated with the voltage specified near the power
input on the rear panel.
•
Before opening up the case or moving a module or blanking panel,
always take
the mains power supply plug out
. This applies also to removing or replacing any
panel or module.
•
All empty spaces in the rack must be filled with modules or blind panels before the
unit is connected to mains voltage.
•
The instrument must never be operated outdoors but only in dry, closed rooms.
Never use the instrument in a humid or wet environment nor near inflammables.
•
Do not use this instrument in damp environments, or close to water.
•
No liquids or conducting materials must get into the instrument. If this should
happen the instrument must be disconnected from power immediately and be
examined, cleaned and eventually be repaired by a qualified person
•
Do not use this instrument in close proximity to heat sources such as radiators or
ovens. Don’t leave it in direct sunlight.
•
This instrument must be assembled or installed in a way that guarantees sufficient
ventilation and air circulation.
•
The instrument must not be exposed to temperatures above 50°C or below -10 °C.
In use, the instrument must be at a minimum temperature of 10 °C.
•
In case of an A-100G6 case: keep the top side of the instrument free in order to
guarantee proper ventilation, otherwise the instrument could be overheated. Never
place heavy objects on the instrument.
•
This instrument can, without any external amplification or in combination with a
headphone or speaker amplifier, produce sound levels which can damage your
hearing. Don’t work at high sound levels for prolonged periods of time, and don’t
ever use levels which cause discomfort.
•
The instrument’s mains power supply lead should be disconnected if it is not used
for any substantial period. If there is any damage the cables must be repaired or
replaced by an authorized person
•
Do not tread on the mains supply lead.
•
In disconnecting the lead, pull the plug, not the cable.
•
If this instrument is connected to others, check in their manuals for connection
instructions.
(744 pages)
(10 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels